Italian Plaster
Our spin on a timeless classic.

Composition: Slaked lime, recycled marble oxide pigments.
Give any space the mark of elegance with a true Rialto lime plaster, from the quarries of Carrere. We start with Vero’s world-renowned Italian plaster—then mix it to perfection with over 50% post-industrial, recycled aggregate.

• Very low VOC emissions
• 28% lower CO2 emissions than stucco
• Made from over 50% recycled content
• Anti-microbial, hypo-allergenic and mold resistant
• 100% natural
• Easy to clean
• Can be applied to sheet rock (3-5 level recommended)
• Suitable for use in both exterior and interior applications—including ceilings

LEED point profile:

• IDCR 1-1.4 for innovation in design
• ME 4.1 + MR 4.2 for recycled content
• EQCR 4.2 for low emitting materials

Venetian Clay Plaster
The authentic lime plaster of Renaissance Venice—with a green twist.

Composition: Clay, eco-binder and no voc pigment
There is no mistaking the dense beauty of Venetian plaster, but ours isn’t just beautiful—it’s sustainable. In place of the typical lime base, we use regionally sourced clay. The result is an exquisite, durable finish that is easy on the planet and your brain (negative ions). Only traditional techniques can provide the luster and depth of color we demand—so, our craftsmen apply the plaster by hand, layer upon layer, and rub it to a glasslike finish.

• Very low VOC emissions
• Added health benefits—clay releases negative ions
• Anti-microbial, hypo-allergenic and mold resistant
• 100% natural
• Made in the USA
• Suitable for use in wet or dry, interior applications—including ceilings

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 6 for rapidly renewable materials
• MRCR 5.1-5.2 for regional materials and regional manufacturing
• EQCR 4.2 for low emitting materials

JaDecor “Silk Road an Original Cotton Finish”
This blend of fibers and minerals makes for a unique surface—part fabric, part stone.

Composition: Organic cotton and or rayon fibers(wood pulp), cellulose and pigment.
JaDecor is a patented blend of natural fibers and minerals in a high-density composition that is applied to a wall like a plaster. It was awarded the highest rating by the IBR (Institute for Baubiologe in Rosenheim, Germany)—considered the gold standard for testing and certification of safe and healthy building products. In addition to improving air quality, JaDecor provides acoustic and thermal benefits not found in other wall treatments. The composition of fibers, minerals and dyes is infinitely customizable, making every application truly unique. JaDecor can only be applied by a certified applicator, such as Stonelace.

• Very low VOC emissions
• Durable
• Easy to repair (DIY)
• Moisture controlling & mold resistant
• Class A fire rating—ASTM E-84
• Excellent heat insulator
• Excellent acoustic insulator
• Color, composition and texture are completely customizable to suit the application
• Can be applied to sheet rock, brick or concrete
• Suitable for use in wet or dry, interior applications—including ceilings

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 6 for rapidly renewable materials
• MRCR 5.1-5.2 for regionally sourced materials
• EQCR 4.2 for low emitting materials
• MRCR 2.1-2.2 for construction materials

Japanese Stone Plaster
An iridescent, textured finish enriched by subtle shifts of color.

Composition: Sand, recycled stone and eco-binder
Create unforgettable spaces with this elegant finish from Japan. Multiple colors baked into post-industrial, recycled aggregate provide a dazzling appearance, as well as an inviting texture.

• Low VOC emissions
• Highly Durable
• Easy to clean
• Mold resistant.
• Class A fire rating
• Refracts light—boosting room ambience
• Can be applied to sheet rock (3-5 level recommended)
• Suitable for use in wet or dry, interior applications—including ceilings

LEED point profile:

• EQCR  4.2 for low emitting materials
• IDER 1-1.4 for innovation
• MR 4.1-4.2 for recycled content
• EQCR 4.2 for low emitting materials

Wabi Sabi (Traditional Japanese Plaster)
Provide elegant tranquility to any space with this traditional Japanese finish.

Composition: Clay, straw, wood pulp and eco-binder
For centuries, this finish has adorned the walls of Japanese teahouses, where its earthy beauty is an integral part of the subtle, Zen refinement exemplified by the “art of tea.”

• Very low VOC emissions
• Added health benefits—clay releases negative ions
• 100% natural
• Suitable for use in dry, interior applications

LEED point profile:

• EQCR 4.2 for low emitting materials
• IDER 1-1.4 for innovation
• MRCR 6 for rapidly renewable materials
• MRCR 2.1-2.2 for construction materials

Silk Rock
A luminescent beauty—with no metallic aftertaste.

Composition:  Mica, ecobinder and recycled plastic
Another Stonelace exclusive. We apply mica, biopolymer topcoat over a basecoat comprised of 90% post-industrial recycled materials—to create a deep, pearlescent finish. The metallic look is made from stone, which means no airborne metals.

• Zero VOC emissions
• Catches light—boosting room ambience
• Can be applied to sheet rock (3-5 level recommended)
• Suitable for use in dry, interior applications—including ceilings

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 6 for rapidly renewable materials
• MRCR 5.1-5.2 for regionally sourced materials
• MR 4.1-4.2 for recycled content
• EQCR 4.2 for low emitting materials

Verite^®
A revolutionary finish proves that strength can be graceful.

Composition:  Magnesium sulfate, magnesium oxide, gypsum, recycled fly ash and PVA catalyst
Our flagship finish. Verite is a revolutionary geopolymer available exclusively through Stonelace. Minerals, salts, water and pre-consumer, recycled material merge to create this elegant, stone-like material. It thermogenically cures and uses less than 5% cement. Verite’s micro-aggregates accept pigments beautifully, and it’s cementitious matrix acts like glue—allowing the incorporation of additional materials to enhance appearance, and significantly increase LEED points.

• Zero carbon emissions—lower than any other cementitious material on the market
• Extremely thin profile and lightweight
• Highly durable—impact, scratch and crack resistant
• Water resistant and fire retardant
• Increases shear strength of existing walls
• 5000 PSI rating
• Fast drying—close to full strength in just seven days
• Easy to repair and low maintenance
• Hypoallergenic
• Can be applied to virtually any surface—from sheet rock to plastic
• Suitable for use in interiors.

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 5.1-5.2 for regionally sourced materials
• MR 4.1-4.2 for recycled content
• EQCR 4.2 for low emitting materials

Recycled Glass Plaster
This opalescent finish breathes life and light into even the darkest spaces.

Composition: Natural glass, recycled glass, quartz, eco-binder and pigment
Our glass plasters are comprised entirely of material that captures and refracts light—making walls come alive. By tailoring the blend of additives, we create a unique look to suit any application. The variations are as limitless as your imagination.

• Low VOC emissions
• Hypoallergenic
• All natural materials
• Highly durable
• Easy to repair
• Catches light—boosting room ambience
• Can be applied to sheet rock (3-5 level recommended)
• Suitable for use in dry, interior applications

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 6 for rapidly renewable materials
• MRCR 5.1-5.2 for regionally sourced materials
• MR 4.1-4.2 for recycled content

River Rock Finish
The look and feel of smooth stone, with a distinctive “wet effect.”

Composition: Azul sand, eco-binder, recycled plastic and mica pigment
This Stonelace exclusive is made from 90% recycled material, crowned with a smooth clay topcoat. Mica pigments provide a distinctive yet subtle glistening quality, best described as “the wet effect.” The stunning resemblance to worn and polished river stone is as pleasing to the touch as it is to the eye.

• Very low VOC emissions
• Added health benefits—clay releases negative ions
• Hypoallergenic, mold and dust mite resistant
• Made from 100% natural and recycled materials
• Soothingly tactile texture
• Can be applied to sheet rock (3-5 level recommended)
• Suitable for use in wet or dry, interior applications—including ceilings

LEED point profile:

• IDCR 1-1.4 for innovation in design
• MRCR 6 for rapidly renewable materials
• MRCR 5.1-5.2 for regionally sourced materials
• MR 4.1-4.2 for recycled content
• EQCR 4.2 for low emitting materials